7
VKB Gunfighter Mk.II Quick
Guide - HARDWARE
Replacing/Installing cams – do this for each axis:
(Refer to pg. 4 on how to access the gimbal)
1. Remove the springs.
2. Unscrew the M4 nut and detach the cam from the gimbal.
3. Pay attention to the position of the washers between the cam and the bearing.
4. Replace the cam, tighten the M4 nut.
5. Install the springs.
6. When done, assemble in reverse order (pay attention to the washers between the cam and the bearing, as
these washers need to be installed in the same location as identified in step 3 above!)
REFER TO THIS VIDEO IF YOU NEED HELP:
https://www.youtube.com/watch?v=_x6RdEJJ_PM
(Even though the video pertains to the Gladiator Pro, the gimbal design (including cams and springs), is pretty
much the same for the Gunfighter)
