15. SOS Alert
The Master controller number is the default number to receive the SOS
message, other mobile phone numbers can be bounded together to receive the
SOS message by below operation 15.1
15.1 Registering the panic button bounded number
SMS
to the device:
*master*1XXXXXXAXXXXXXBXXXXXXXXXXXX
*+CXXXXXXXXXXXX*
,
+1XXXXXXXXXXXX refers to master controller number. +1 refers to the country code.
+AXXXXXXXXXXXX, +BXXXXXXXXXXXX, +CXXXXXXXXXXXX refer to panic button bounded
number. Up to 3 phone numbers can be bounded
NOTE: Please make sure country code is included, and digit 0 is not needed before cell
phone number
Device Response:
"Notice: Cell Phone # xxxxxxxxxx is set to master controller, the
password is 123456.”
(The device has a default password of “123456”
to initially program
in your PDA/Phone.
NOTE: All bounded number will receive the above response when command is received.
15.2 Panic Button
1. Short press button 2 times and then long press button 1 time more than 3 seconds,
system will send 2 SOS SMS to bounded phone numbers.
Bounded phone numbers will receive SMS “SOS! HELP! SOS!! HELP!! SOS!!! HELP!!!”
SMS:
*soson*
Device Response:
“
Notice
:
SOS alert function enabled.”
SMS:
*sosoff*
Device Response:
“
Notice
:
SOS alert function disabled.”
NOTE: The default setting is OFF. Please send SMS *soson* to enable this function. And all
bounded numbers are capable to control device as master controller does.
16. Low battery Alert:
The device is equipped with an automatic “Low Battery”
detection and alert when the
battery drops to 20% of it’s capacity. An alert SMS will be sent to appointed phone
number and the real-time tracking function will be turned off for power saving.
Appointed alert number settings
Default alert phone number is registered master number, and it can be changed as
needed.
