detection system. Since certain bikes are more sensitive to external vibration
sources, the sensor has variable sensitivity settings. The unit comes from the
factory pre-set to #1, on a scale of 1-5, with 1 being the most sensitive. If
you notice you are getting excessive false movement alerts (like when a
heavy truck drives by), you can simply send the following SMS to the unit,
and reset the variable:
SMS:
*sensitive*1-5*
(where X = 1-5, 1 being the most sensitive, 5 the
least)
1=3seconds continued vibrating
5=15seconds continued vibrating
Default setting is 1 (per the explanation above)
SMS:
*senstive*1-5*
You will receive a text message
“
Notice
: Vibration sensitivity is set to 1-5.”
!
10. Status query
SMS:
*status*
System Health and status check. Returns text message indicating various
system diagnostics
!
!
!
112. Multi Controller
This allows any SMS enabled cell device to query the unit for
location, status, etc.
!
SMS:
*multiquery*
The unit will retun text to the master controller “Notice: Multi query feature
enabled.”
!
SMS:
*multiqueryoff*
The unit will now only respond to the Master controller. It will send a text to
the Master controller “ Notice: Multi query feature disabled.”
!
!
!
12.Device Information
SMS:
*about*
You will receive a text message include software edition information and
device’s serial number.
!
!
!
13. Branding Settings
Send a commend enable you to use your own brand in the reply text
message. It is default as KingNeed.
!
This is a factory command. Only manufacture able to send this command.
