This check function enables user check location in appointed long time
interval.
!
SMS:
*check*0-99*
(0-99 represents hours of data upload interval, default
as *check*0*)
!
SMS:
*checkm*10-999*
(10-999 represents minutes of data upload
interval)
!
SMS
：
*checkoff*
Device Response:
“Notice: System has ended check function.”
!
Noted: Check function is able to work with routetrack command at the same
time.
!
!
!
7.3 Track Off
SMS
：
*trackoff*
Device Response:
“Notice: System has ended all tracking functions.”
!
!
8. Geofencing
The device is equipped with an automatic GeoFencing function that will,
on command set a 01-99km radius “bubble” around the vehicle/motorcycle.
Movement within this area is ignored. Crossing outside can become an SMS
alert. To set the GeoFence, from the master controller;
!
8.1 SMS
：
*fence*1-99*
You will receive a text message notifying you “Notice: The GeoFence is set.
Radius is set to XXX km”
Movement that exits the geofence will be immediately texted to the
master controller as a “Notice: GeoFence Exit Alert.”
To disable the Geofence,
8.2 SMS
：
*fenceoff*
You will receive a text notifying you “Notice: The
Geofence is disabled.”
!
It should be noted, that if you disable the SMS, Movement Alert and the
Movement Call Alert; but have the GeoFence Alert in place, the first message
notifying you of movement will be the GeoFence Exit.
!
!
!
9. Vibration Sensitivity
!
!
The device you have purchased is equipped with a sensitive Vibration
