!
!
3. Product Image
!
!
!
!
!
!
!
!
!
!
!
!
4. Operation Command Guide
4.1 Set APN:
(VERY IMPORTANT AND MUST BE DONE 1ST) For the
device to send data to the server, this command MUST be enabled.
!
SMS:
*apn*AXXX*BXXX*CXXX*
This command sets the telecom
A
ccess
P
oint
N
ame. BXXX refers to user name, CXXX refers to password.
!
If there is no user name and password required, send as
*apn*AXXX*
!
If there is user name but no password required, send as
*apn*AXXX* BXXX*
!
!
APN information can be checked on local telecom website.
!
You will receive the following text: "Notice: APN is set to XXX. User name: XX.
Password: XX”
!
Note: For International sims, please contact sales for activation and APN
information.
!
!
4.2 Registering the “Master” Controller
SMS
to the device:
*master*1XXXXXXXXXXXX*
, (For
instance, master controller phone number is +1XXXXXXXXXXXX. +1 refers to
the country code. XXXXXXXXXXXX is the cellphone number. Please make sure
country code is included, and digit 0 is not needed before cell phone number)
!!
Device Response:
"Notice: Cell Phone # xxxxxxxxxx is set to master
controller, the password is 123456.” (The device has a default password of
“123456” to initially program in your PDA/Phone.
!
