Lost keys erasing
All keys erasing
PRG
PRG
OPERATION
ACCESS mode
GUARD mode
N
SPECIFICATIONS
0
1
1 or 7 sec
VAC
230 ± 23
W
0
+DL
-DL
(13.5 +/- 1.5) VDC / 0.7 A (cont.)
(12 +/- 1.5) VDC / 1.2A (<1 sec.)
ELC
GND
(20 +/- 2) VDC / 0.7 A
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
Move the
close to
’s antenna and hold it
are
ing
Approach
’s antenna
300M
The
Approach
to the reader’s antenna,
from the
memory
When done, approach
to the reader’s antenna, the system returns
the
.
from the control unit
is
ing
300M
are
ing the
is lighting: t
is
ing
and hold
300M
before
beeps stop Two short beeps
are sounding, and within 20 seconds the systems clears the memory. When done, a
is
ing
replace
the
g
the
’s
is
antenna
’s code
’s
are
ing
,
’s
is
ing
’s code
found
is
ing
300M
Move
close
’s antenna
are
ing the
is
ing
the
D
not available
When the GUARD mode is on, a
regular
to the reader
Approach
once more to the reader’s antenna
the
. T
are
ing The MASTER-key may be used as well to switch the GUARD mode off.
A
does not function as
, it cannot
The GUARD mode does not block t
, and it may
from inside of the building
300M
,
with
OPEN
from
MASTER-key
the reader
for 5 seconds at least. The lock is released, short beeps
and three long beeps
sound
. Take the MASTER-key off before the third long beep ends.
the MASTER-key briefly to the reader
, then press the EXIT
button twice.
LED shuts off.
the key with previous number (N-1)
and the lost key (number N) is erased
.
the MASTER-key briefly
to
ACCESS mode
The following sequence of operations results in erasing of all keys, including the MASTER-key!
Turn the power off.
Remove the lid
and take the
jumper off.
Turn the power on. A long beep
sound
.
Press the EXIT
button. Twenty short beeps
sound
,
LED
he system
wait
for
confirmation. To confirm, press
the EXIT
button for 2 seconds
the
.
long beep
sound
.
Turn the power off, restore the
jumper to its place and
the lid.
In 30 – 50 seconds of idle the system returns to
ACCESS mode.
One of the following operatin modes is available:
ACCESS mode
GUARD mode
The door is locked in
stand-by mode. The
.
To unlock the door,
an ACCESS (MASTER)-key
to the
If the key
is stored in the
control unit memory, the lock releases, short beeps
sound
for 7 seconds and the
LED
illuminat
.
If the key
is not
, then the door remains locked and a long beep
sound
.
To unlock the door from inside of the building, press the EXIT
button.
a GUARD key
to the reader
. One short and one long beeps
sound
,
LED
illuminat
,
the system goes to
GUARD mode. oor unlocking with ACCESS keys is
in this mode.
pplying a
ACCESS key
results in a long beep.
a GUARD key
to return to
ACCESS mode
wo short and one long
beeps
sound
.
GUARD key
an access key
unlock the door.
he lock
be released
by pressing the
EXIT
button or
DOOR
button
a subscriber device.
ACCESS keys, max.
GUARD keys, max.
MASTER-key
Unlocked state duration
Operating voltage,
(50-60Hz)
Power consumption,
max.
Lock supply voltage across
&
terminals:
Electromagnetic Lock (locked state)
Electromechanical Lock (unlocking)
Doorstation supply voltage
across
&
terminals:
IMPORTANT.
Note.
ote 1.
Note 2.
268
28
2
.
control unit
LED
blink
reader
control unit
ing
approach
close
’s
PART
Control Unit
Reader
Temperature
range
+1°C
+40°C
up to
-40°C
+50°C
up to
Humidity of air
up to
at
93%
25°C
up to
at
98%
25°C
Dimensions,
mm
165x90x60
47x75x25
Weight, kg
0.85
0.1
www.vizit.eu
VIZIT-КТМ602R
6/6
OPERATING INSTRUCTION
