KEY MEMORIZING AND ERASING FROM THE CONTROL UNIT
MEMORY
“Key
No…- User”
MASTER-key memorizing
PRG
PRG
N
ACCESS keys memorizing
N
GUARD keys memorizing
N
ACCESS and GUARD keys erasing
1
“Key No…- User”
N
2
’S
1
2
ote.
ote.
ote.
Note .
ote .
keys
the
installation
r
300M
(or button for exit)
T
are
and
Lost key erasing
records
2680
,
28
,
approach
’s antenna
Make records of key numbers and their users, this list (
) may be
from the control unit
is
ing
Approach
blank
close
’s antenna
are sounding: the MASTER-key
has been recorded.
affect
replace
f
have been approached to the reader’s antenna only
will be
Move the
close to
’s antenna and hold it
are
ing
roach a blank key
’s antenna to record it as an
S
are
ing: the key has been memorized.
A single
indicates
:
in the memory,
To record the next
, approach a new blank key
’s antenna
When done with recording, approach
to the reader’s antenna. After two
, approach
the reader to
the
After 2680
’
have been recorded,
are
ing
not available
Move the
close to
’s antenna and hold it
are
ing
300M
. O
is sounding the
is illuminating
roach a blank key
’s antenna to record it as a GUARD
are
ing:
the key has been memorized.
To record the next GUARD
, approach a new blank key
’s antenna
When done with recording, approach
to the reader’s antenna, the system returns
the
.
After 28
have been recorded,
are
ing
not available
Move the
close to
’s antenna and hold it
are
ing
Approach
to the reader’s antenna, t
are sounding the
is illuminating
roach
you want to
’s antenna
s are
ing: this key has
been deleted from the system’s memory
A single
indicates
:
does not
in the memory.
To erase the next
, approach it close
’s antenna
When done with erasing, approach
to the reader’s antenna, the system returns
the
.
After a key has been erased, its
is cleared F
on, d
key
memory
when
list
may
only
Memorizing of ACCESS, GUARD
and
MASTER-key is recommended to be performed before
. To
memorize or erase keys, connect the control unit, eader and EXIT
button
following Figures or .
he following modes
available:
MASTER-key memorizing
ACCESS
GUARD keys memorizing / erasing
Erasing of all data
The Control unit
each key code in the next free memory cell numbering them from No1 up to No
for
ACCESS keys and from No1 up to No
for GUARD keys. Enumerate ACCESS keys beforehand and
them
one by one to the reader
during memorizing.
useful for key management in case of a lost key.
Turn the power off.
Remove the lid
and take the
jumper off.
Turn the power on. A long beep
sound
.
a
key
to the reader
. One short and two long beeps
MASTER-key memorizing does not
other settings.
To quit this mode, turn the power off, restore the
jumper to its place and
the lid.
I several keys
,
the last one
memorized as the
MASTER-key.
MASTER-key
the reader
for 5 seconds at least. The lock is released, short
beeps and three long beeps
sound
. Take the MASTER-key off before the third long beep ends.
App
to the reader
ACCES
key. One short and one long beeps
sound
long beep (without a short one)
an error the key already exists
or it is defective.
ACCESS key
to the reader
, and so on.
the MASTER-key briefly
long beeps
it again to
return to
ACCESS mode.
user s keys
5 short beeps
sound
. Further memorizing
of ACCESS keys is
.
MASTER-key
the reader
for 5 seconds at least. The lock is released, short beeps
and three long beeps
sound
. Take the MASTER-key off before the third long beep ends.
Press the EXIT
button briefly
ne long beep
,
LED
.
App
to the reader
key. One short and one long beeps
sound
key
to the reader
, and so on.
the MASTER-key briefly
to
ACCESS mode
GUARD keys
5 short beeps
sound
. Further memorizing of
GUARD keys is
.
MASTER-key
the reader
for 5 seconds at least. The lock is released, short beeps
and three long beeps
sound
. Take the MASTER-key off before the third long beep ends.
the MASTER-key briefly
wo long beeps
,
LED
.
App
a key
erase to the reader
. One short and one long beep
sound
.
long beep (without a short one)
an error the key
exist
key
to the reader
, and so on.
the MASTER-key briefly
to
ACCESS
mode
memory cell
. urther
uring
memorizing, a key code will be
stored in the first clear
cell found. Take it into account
managing
.
Key No1 (ACCESS or GUARD)
be erased
under condition of all keys erasing.
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
www.vizit.eu
VIZIT-КТМ602R
5/6
OPERATING INSTRUCTION
