VIZIO
®
VW32L HDTV40A User Manual
Version 10/17/2008
65
www.VIZIO.com
4.2
TV and Stand Base Assembly
If the original instructions had been misplaced or lost, the following steps are a duplicate of such
document, removing the Stand Base may be the only steps to be done at this point.
NOTE:
It is strongly recommended that two people perform the setup and assembly due to the
weight and size of the TV.
To unpack the TV and stand base
The following steps are required to assemble the two parts:
Stand
Neck
1. Remove the remote control, batteries, and power
cord from the foam end caps.
2. Remove the two top foam end caps.
3. Remove the stand base under foam end cap.
4. Remove the TV from the box and lay it face down on a clean, flat surface.
Note:
Make sure that the surface is free of debris to prevent the TV screen from getting scratched
.
Stand
Base
To
attach
the
TV
stand
base
:
1.
Line
up
the
arrows
on
the
stand
neck
(attached
to
the
TV)
with
the
arrows
on
the
stand
base.
2.
Push
the
stand
base
onto
the
stand
neck
until
you
hear
them
click
together.
3.
On
the
bottom
of
the
base,
insert
the
four
included
screws
and
tighten
them
up.
4.
Move
the
TV
into
an
upright
position.
To
remove
the
stand
base
1.
Remove
the
four
screws
from
the
stand
base.
2.
Pull
the
stand
base
away
from
the
stand
neck.