5
33
Setting the Tuner Mode
If you are using a device that is connected to the RF input, such
as an external antenna or cable TV connection, you must set the
tuner mode.
1. Press the
MENU
button on the remote. The on-screen menu is
displayed.
2. Use the
Arrow
buttons on the remote to highlight the
Settings
icon and press
OK
. The Settings menu is displayed.
3. Highlight
Tuner
and press
OK
. The Tuner Mode menu is
displayed.
4. Highlight
Antenna
or
Cable
and press
OK
.
5. Press the
EXIT
button on the remote.
Scanning for Channels
Before the TV can detect and display channels and their
associated information, you must scan for channels. A channel
scan may also be necessary when the TV has been moved to an
area where different free-to-air broadcast television channels are
available.
1. From the Tuner Settings menu,
highlight
Auto Channel Scan
.
The auto channel scan begins.
2. Wait until the channel scan is
100% complete. Highlight
Done
and press
OK
.
3. Press the
EXIT
button on the
remote.
Adding New Channels
Occasionally, you may need to add a new analog channel or
add a new range of channels. You can do this by using the Partial
Channel Search and Add Analog Channel options.
To add a range of new channels:
1. From the
Tuner
menu, highlight
Partial Channel Search
. The
Partial Channel Search menu is displayed.
2. Highlight
Scan Mode
and select the type of channel you
are adding:
Analog/Digital, Analog
, or
Digital
.
3. Highlight
From Channel
and enter the channel from which
you want to begin the scan. (Use the
Number Pad
on the
remote to enter the channel.)
4. Highlight
To Channel
and enter the channel to which you
want to end the scan. (Use the
Number Pad
on the remote
to enter the channel.)
5. Highlight
Start
and press
OK
. The partial channel search
begins.
6. Wait until the partial channel search is 100% complete.
Highlight
Done
and press
OK
.
7. Press the
EXIT
button on the remote.
