5
31
To connect to a wireless network whose network name (SSID) is
not being broadcast:
1. Press the
MENU
button on the
remote. The on-screen menu is
displayed.
2. Use the
Arrow
buttons on
the remote to highlight the
Network
icon and press
OK
.
The Network Connection menu
is displayed.
3. Highlight
Enter Access Point
Name
and press
OK
.
4. Using the on-screen keyboard,
enter your network’s name
(SSID), then highlight
Connect
and press
OK
.
5. Using the on-screen keyboard,
enter your network’s password,
then highlight
Connect
and
press
OK
.
6. Press the
EXIT
button on the
remote.
Changing the Advanced Network Settings
Advanced users can fine-tune the network settings using the
Manual Setup feature.
To change advanced network settings:
1. From the Network Connection
menu, highlight
Manual Setup
and press
OK
. The Change
Settings menu is displayed.
2. Use the
Arrow
and
OK
buttons
to adjust each setting:
• DHCP
- (Dynamic Host
Configuration Protocol) This
setting must be turned Off
to change any of the other
settings.
• IP Address
- The IP address
assigned to the TV.
• Subnet Mask
- The subnet
mask.
• Default Gateway
- Your
network’s default gateway
address.
• Pref. DNS Server
- Your
preferred domain name
server address.
• Alt DNS Server
- Your alternate domain name server
address.
3. If you need the RJ45 (ethernet) MAC address or the Wireless
MAC address to set up your network, these are displayed at
the bottom of the Change Settings menu.
4. Press the
EXIT
button on the remote.
