background image

iii

•  When connected to a power outlet, power is always flowing 

into your Display. To totally disconnect power, unplug the 

power cord.

•  The lightning flash with arrowhead symbol within an 

equilateral triangle is intended to alert the user to the 

presence of un-isolated, dangerous voltage within the inside of 

your Display that may be of sufficient magnitude to constitute 

a risk of electric shock to persons.

•  Do not overload power strips and extension cords. 

Overloading can result in fire or electric shock. 

•  The wall socket should be installed near your Display and 

easily accessible.

•  Only power of the marked voltage can be used for your 

Display. Any other voltage than the specified voltage may 

cause fire or electric shock.

•  Do not touch the power cord during lightning. To avoid electric 

shock, avoid handling the power cord during electrical storms.

•  Unplug your Display during a lightning storm or when it will 

not be used for long period of time. This will protect your 

Display from damage due to power surges.

•  Do not attempt to repair or service your Display yourself. 

Opening or removing the back cover may expose you to 

high voltages, electric shock, and other hazards. If repair 

is required, contact your dealer and refer all servicing to 

qualified service personnel.

•  WARNING: Keep your Display away from moisture. Do not 

expose your Display to rain or moisture. If water penetrates into 

your Display, unplug the power cord and contact your dealer. 

Continuous use in this case may result in fire or electric shock.

•  Do not use your Display if any abnormality occurs. If any 

smoke or odor becomes apparent, unplug the power cord and 

contact your dealer immediately. Do not try to repair your 

Display yourself. 

•  Avoid using dropped or damaged appliances. If your Display 

is dropped and the housing is damaged, the internal 

components may function abnormally. Unplug the power cord 

immediately and contact your dealer for repair. Continued use 

of your Display may cause fire or electric shock.

•  Do not install your Display in an area with heavy dust or high 

humidity. Operating your Display in environments with heavy 

dust or high humidity may cause fire or electric shock.

•  Follow instructions for moving your Display. Ensure that 

the power cord and any other cables are unplugged before 

moving your Display.

•  When unplugging your Display, hold the AC/DC power adapter, 

not the cord. Pulling on the power cord may damage the 

wires inside the cord and cause fire or electric shock. When 

your Display will not be used for an extended period of time, 

unplug the power cord.

•  To reduce risk of electric shock, do not touch the connector 

with wet hands. 

•  Insert batteries in accordance with instructions. Incorrect 

polarities may cause the batteries to leak which can damage 

the remote control or injure the operator. Do not expose 

batteries to excessive heat such as sunshine, fire or the like.

•  If any of the following occurs, contact the dealer: 

        - The power cord fails or frays.  

        - Liquid sprays or any object drops into your Display.  

        - Your Display is exposed to rain or other moisture. 

        - Your Display is dropped or damaged in any way. 

        - The performance of your Display changes substantially.

•  This apparatus shall not be exposed to dripping or splashing 

and no objects filled with liquids, such as vases, shall be 

placed on the apparatus.

•  The mains plug or appliance coupler is used as the disconnect 

device, the disconnect device shall remain readily operable.

•  CAUTION - These servicing instructions are for use by qualified 

service personnel only. To reduce the risk of electric shock, 

do not perform any servicing other than that contained in the 

operating instructions unless you are qualified to do so.

•  The lightning flash with arrowhead symbol within an 

equilateral triangle is intended to alert the user to the 

presence of uninsulated DANGEROUS VOLTAGE within 

the product’s enclosure that may be of sufficient 

magnitude to constitute a risk of electrical shock to persons.

•  WARNING: Exposure to loud sounds can damage your hearing 

causing hearing loss and tinnitus (ringing or buzzing in the 

ears).  with continued exposure to  loud noises, ears may 

h  

become accustomed to the sound level, which may result 

in permanent damage to hearing without any noticeable 

discomfort.

•  Install the Display where it cannot be pulled, pushed or 

knocked over.

•  Do not allow children to hang onto the product.
•  Store the accessories (remote, batteries, etc.) in a location 

safely out of the reach of children.

•  The American Academy of Pediatrics discourages television 

viewing for children younger than two years of age.

•  WARNING: Never place a television set in an unstable 

location. A television set may fall, causing serious 

personal injury or death. Many injuries, particularly to 

children, can be avoided by taking simple precautions 

such as:

•  Using cabinets or stands recommended by the 

manufacturer of the television set.

•  Only using furniture that can safely support the television 

set

•  Ensuring the television set is not overhanging the edge of 

the supporting furniture.

•  Not placing the television set on tall furniture (for 

example, cupboards or bookcases) without anchoring 

both the furniture and the television set to a suitable 

support.

•  Not placing the television set on cloth or other materials 

that may be located between the television set and the 

supporting furniture.

•  Educating children about the dangers of climbing on 

furniture to reach the television set or its controls.

•  If your existing television set is being retained and relocated, 

the same considerations as above should be applied.

Содержание P55-E1













































Отзывы: