Problem Solution
(7) Cannot lock signal by using "Manual
Setup”
(a) Check the channel number is correct according to the channel table and
updated channel table information on Appendix 1
(b) Refer to solutions in item (3) on page 24.
(8) No Closed Caption
(a) Make sure the channel you are watching carries closed caption
information.
(b) Press TTX button on the remote control to double check there’s closed
caption data output
(9) Cannot receive channels after moving
the receiver between cities
(for instance from New York to Los
Angeles)
(a) Enter into Service Mode Menu and use "Delete All Channels" clear the
channel memory, then use "Auto Installation" or "Manual Installation" to
scan through all the channels again. Please consult your local dealer for
how to entering into the Service Mode Menu
* On Screen Error Message
Message Solution
(1) Bad Signal
(a) Check the antenna is connected correctly and firmly to the tuner input A
(ANT A IN ) of the receiver or cable TV is connected to tuner input B
(ANT B IN) of the receiver.
(b) Refer to solutions in Item (3) on page 24.
(c) Check the digital channel whether it is out of service or not
.
(2) Non Support HD Format
(a) This message suggests when you are watching the program from AUX
input you cannot show HDTV digital channel on the small PIP screen
(3) Scrambled Channel
(a) The message suggests the program you are watching is scrambled by
the TV station, which cannot be decoded by BRAVO HD1
.
24
APPENDIX 2 TROUBLE SHOOTING
