(a) Connect PC and BRAVO HD1 with cross-over
RS232 cable (cable for null modem)
(b) ON the PC side : Launch MS Windows
HyperTerminal
-
Name the connection
-
Select the correct Com Port – usually Com 1
-
Comport setting :
baud rate: 115200
data:8
parity:none
stop bit:1
flow control: none
-
Select HyperTerminal’s basic function “Transfer”
-
Select “Send File”
-
Browse to select the updated software file
Protocol is “1K Xmodem”
DON’T click on the “Send” button at this time
Then on the receiver side you can select YES
●
On the receiver side, After you select YES, a new
message will show in the window telling you the
current
software version and its size, make sure this software
version is different from the version of the updated
software file stored on your PC. Then select YES to
proceed the download, on selecting YES, a new
message
will show up saying the software update is in progress.
●
On the PC side you have to click on the Send button to
start uploading the new software.
●
On the receiver side you can see the window with a
bar showing you the download progress
●
When download is complete, the TV screen will go
blank. On the PC side, the message flow stops. At this
moment please disconnect the receiver’s main lead,
then
connect the main lead to cycle the receiver’s power
●
A window will pop up telling you the receiver’s data
base is empty. Please press MENU key on the remote
control, select PROFILE option, then select
INFORMATION to check the new software version
is changed to the new one. Then follow instructions on
page 10 and 11 to scan digital TV channels.
14
