●
When the I-Plate is still on the TV screen, you can
press “INFO” button again to call up the extended
program information of the current TV channel
.
●
You can highlight the specific program and press
“SELECT” button on the remote control to obtain
detailed program information.
●
To leave these windows you can press “EXIT” button
●
When you are watching DVD programs from AUX IN
(Video In and Audio In connectors on the receiver’s
back panel), you can press “V.FORMAT” button on
the remote control to upscale the picture resolution to
1080i or 720p.
●
Press “PIP” button on the remote control, you can get
the PIP PROGRAM list containing all digital TV
programs within the same RF channel (for instance,
Channel Ten), select the Digital TV program, press
SELECT button , then you can watch this Digital TV
program by PIP, which is in the small screen on the
right bottom side of the screen. .
Note : HD Digital TV program cannot be shown on the
small screen, only SD Digital TV programs are
good for PIP when the receiver is in AUX IN mode
●
When you are watching the terrestrial TV programs
(not in Main Menu), you can press PIP button on the
remote control to show the multiple programs on
TV screen
●
Use “
▲
” and “
▼
” keys to browse through the
program lists
●
Highlight the program and press “SELECT” key
and leave the menu, you will get Picture in Picture –
two programs on the TV screen at the same time.
●
To close the small screen you can enter into PIP
again and select “PIP OFF”.
Note : when you are watching terrestrial TV channels and
calling up the PIP PROGRAM window, you can also
select AUX to view external video source such as
DVD player on the small picture window
When you watch terrestrial TV channel, press “
INPUT key
17
PIP (To watch two channels at the same time)
AUX IN (External Video/Audio Input)
