2D
1) To mount the TV, connect the lift to the power supply (according to the electrical connection diagram) and
tilt the movable lift arm so that it is vertically to the floor.
2) Place the TV set with the bracket to the movable lift arm (marked D) and center it so that the TV is in the
center of the arm (marked D).
3) Carefully closing the lift make sure that after closing the lift the TV is hidden symmetrically in the CP lift
housing protecting the TV (symmetrical TV spaced from the edge of the lift).
4) Tighten the counter screws (marked E) with an Allen key.
5) Pass the power and signal cables to the TV through the oval hole (marked F) in the CP-LIFT housing and fasten
them to the housing with a hose clamp, through the prepared "G" holes.
D
F
G
E
3/6
