LIST OF ITEMS:
Lift for TV;
TV bracket;
Mounting kit;
Installation manual
1.
PREPARATIONS FOR MOUNTING:
(
TRUST INSTALL WITH PROFESSIONAL AUDIO VIDEO INSTALLERS)
1. After removing the lift from the transport packaging, connect the lift to 230V power supply according to
the diagram - electrical connection (page 5, pict. 3).
2. Start the lift to open.
3. Remove the white plate from the lift (pict. 2B). Then, as shown in pict. 2E, tihgten the "K" screws. Then,
lifting up, remove the "H" plate.
4. Close the lift again and disconnect from power supply.
2.
INSTALLARION AND ADJUSTMENT:
2A 1. Mark the CP-LIFT mounting location and drill 4 holes in the solid ceiling, and then place dowels inside
(The manufacturer provides standard dowels in the mounting kit. The selection of appropriate dowels and
screws for the type of ceiling at the installation is on the side of the installation team) .
2. Pass the lift bean holes (marked A) insert the bolts and tighten them to stable mounting the lift to the
ceiling.
CP-LIFT S
TV lift
A
1/6
