Vivotek SD9161-H Скачать руководство пользователя страница 6

Страница: 6 / 470

VIVOTEK

6 - User's Manual

IMPORTANT:

1. These devices(IR LEDs) emit highly concentrated infrared light, which view angle(range) is

smoothly varied depending on operation mode. To avoid risk of eye injury, please do not look

directly at the LEDs at a near distance.

2. Remember to use the camera live view to check if the IR illumination is active.

IMPORTANT:

If DC power is preferred, it should comply with: O/P: 12VDC, 2A min., L.P.S. per IEC 60950-1.

Si l'alimentation CC est préférable, elle devrait être conforme avec ce qui suit : Sortie : 12 VCC, 2

A min., alimentation limitée à conformité CEI 60950-1.

NOTE:

Camera Hardware Preventative Maintenance:

1. Visual inspection of all major components including accessories, cabling and connections

where accessible for signs of deterioration or damage.

2. Check and clean cameras, lenses and housings inside and out as needed.

• Please do not scratch, damage, or leave fingerprints on the dome/front cover and/or lens

because this may decrease image quality.

• For general cleaning of dirty areas, it is suggested to use compressed air to remove dust

and/or other debris in order not to damage the on-board components.

• In order to clean oil stains, it is recommended to use a spray-type decomposing cleaner

(absolutely avoid reciprocating wipes on the surface). After the oil has decomposed, spray

it with water, dry with air, and/or absorb water with a cotton cloth or a soft cloth (dab, please

avoid wiping).

• Do not use harsh detergents, gasoline, benzene or acetone, etc. to clean as they may

deform or cause damage to the product. Also, excessive cleaning could damage the surface.

3. Check images for correct field of view (pan, tilt and zoom focus) and adjust as necessary.

4. Check and replace the Micro SD memory card as needed.

• Stop edge recording before removing the Micro SD memory card.

• Make sure that the Micro SD memory card is right side up and do not insert it with force,

otherwise it may be damaged.

• When it is raining or the humidity is high, insertion or ejection of the Micro SD memory card

is not recommended.

5. Disassembly of the dome/front cover carries the risk of internal dew condensation, so please

remember to replace the desiccant bags on the inside of the cameras before reassembly.

6. Check that the camera view has not been blocked by obstacles and that you can see the

property perimeter clearly.

7. Make sure the interiors of cameras and accessories, like mounting kits and/or enclosures,

are clean and dry.

8. Make sure cameras are securely attached to the wall/ceiling/mounting kits.

Содержание SD9161-H























































































































































































































































































































































































































































































Результаты поиска

Содержание SD9161-H

Отзывы:

Похожие инструкции для SD9161-H

Бренды по названию

Популярные бренды

Vivotek SD9161-H, Руководство пользователя

Результаты поиска

Содержание SD9161-H

Отзывы:

Похожие инструкции для SD9161-H

Бренды по названию

Популярные бренды