Vivotek NR8201, Быстрое руководство по установке

Страница: 7 / 10

EN - 6
1. Connect the supplied power cable from the Network Video Recorder (NVR) to a power
outlet.
2. Push the power button to run the NVR.
3. Connect network cameras to the NVR’s PoE LAN ports. Connect a management PC to the
WAN port directly or via LAN. The NVR comes with an embedded DHCP server for its LAN
ports. It is necessary to configure the LAN ports and the WAN port into different Class C
subnets, e.g., 192.168.100.xxx for LAN and 192.168.4.xxx for WAN.
4. If you want to access NVR over the Internet, connect the NVR to the Internet via the
WAN port.
5. If you have external devices such as sensors and alarms, make connections from the
general I/O terminal block.
1 2 3 4 5 6 7 8 9 101112
WAN
POWER AC IN 100V-240V
LAN8
LAN7
LAN6
LAN5
LAN4
LAN3
LAN2
LAN1
RESET
Private LAN
Activity
Power/MIC
Activity
Power/MIC x8
Internet
LAN
1
3
Network Camera
(PoE)
Network Deployment
4
4
1: Power
2: Relay output COM
3: Relay output N.O.
4: Digital Input 1
5: Digital Input 1 Ground
6: Digital Input 2
7: Digital Input 2 Ground
8: Digital Input 3
9: Digital Input 3 Ground
10: Digital Input 4
11: Digital Input 4 Ground
12: Ground
5
5
Cable, DSL
Modem, or router
2
3
WAN LAN1
LAN2 LAN3
LAN4
LAN5 LAN6
LAN7 LAN8
Power PoE
Status HDD
NR8301 Netw
ork Video Rec order
WAN
LAN1
LAN2 LAN3
LAN4
Power PoE
Status HDD
NR8201 Networ
k Video Recor
der
NR8301
NR8201
8-CH PoE
Data Transmitting
Power Supply
4-CH PoE
Data Transmitting
Power Supply
NVR embedded
DHCP server
Management
PC
Class C
subnet #0
Class C
subnet #1