manualshive.com logo in svg

Vivotek ND8301, Руководство пользователя

Поделиться
Скачать
Vivotek ND8301 Скачать руководство пользователя страница 23

 

 

VIVOTEK 

 

User's Manual - 23  

Menu Bar

The menu bar contains the following menus:

Menu

Description

Control Center

As previously described, the Control Center is the main access point to major 

functionalities. 

Disk Status

Disk Status provides a glimpse of Logical Volumes, Physical disk statuses, HDD status 

reported through S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology), and 

a test tool to check the integrity of individual disk drives. 

Network Status Displays the network statuses of the NVR's two GbE Ethernet ports, including network 

type, IP address, subnet, and gateway information.

System Status Reports system overall working status. 

Upgrade

The Upgrade provides access to NVR system updates. 

File Manager

The File Manager helps locate particular system or video data when the need 

arises, say, for retrieving forensic evidences. 

Keyboard

If a keyboard is not available, use this virtual keyboard for entering data. 

Power down 

button

Use it to power down or restart the system. 

Most of the NVR's major functionalities are managed through the LiveClient and Playback 

interfaces, refer to Chapter 4 for descirption of auxiliary functions. 

The operating system and VAST server are installed on an IDE flash mounted on the main 

board. There is no need to install software. 

Except for LiveClient and Playback, detailed description of the auxiliary functions can be found 

in 

Chapter Four 

started from page 199.  

NOTE:

The system should always be powered off using the 

Power Down

 button on the desktop. If the 

system should hang for some reasons, you can press the power button on the front panel for 4 

seconds to power off the system. 

Alarm Sound

The onboard buzzer will sound if the following occurs: A 

hard drive

 is 

removed or if the 

LAN

 or 

WAN

 port is disconnected. Mute the alarm by 

closing the event prompt. 

The hard disk reported as "failed" via S.M.A.R.T. will also trigger the 

alarm sound and a warning message. 

Содержание ND8301





















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды