7
Section 4: Stand Installation
Keep the foam underneath the monitor before attaching the stand.
1. Open the package and take out the monitor with foam still attached. Gently place
it top-down on a desktop or table.
2. Take out the stem and base. Insert the stand stem into the base, then use a
screwdriver (not included) and one NO.2 screw to fasten base to the stem.
NO.2 Screw x 1
Stand Stem
Base
3. Attached the stem onto the back of monitor. Use the included four NO.1 screws to
install it onto the monitor.
NO.1 Screws x 4
4. Take out the decorative cover from the package and cover it onto the back of
monitor. With the stand fully assembled, remove the remaining foam on monitor
and stand it up on a flat, level desktop or table.
Decorative Cover
Make sure the monitor is laid on a flat surface before removing the stand.
Содержание NBV27CB2
Страница 2: ......
Страница 18: ......
Страница 19: ......
Страница 20: ...COPYRIGHT 2021 VIOTEK ALL RIGHTS RESERVED ...