Vivotek KA-SD10, Инструкция по эксплуатации

Страница: 3 / 40

WARNINGS & CAUTION
If you fail to read this information and
handle the product incorrectly, death or
serious injury may occur.
1. Camera
2. Screws ( Ø4x16 screw 5EA )
3. Screws ( Ø3.5x30 screw 3EA )
4. Terminal block (5pin 2EA)
5. Manual
6. Screw Cap (1 EA)
7. Wrench
8. Safety Wire
The unit should be installed by the trained
personnel
Switch off immediately if the product emits
smoke or abnormal heat.
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
This symbol is intended to alert the user to
the presence of un-insulated “dangerous
voltage” within the product’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
Never install the product in area exposed to
water, oil or gas.
Never install the product on a ceiling that
cannot hold its weight.
Never touch the power cord with wet hands.
Clean only with dry cloth.
Never install the product in extreme high or
low temperature.
Ensure that the product is not subjected to
strong impacts and vibration
Warning
Never manually move the pan/tilt
assembly. Serious and permanent
damage will occur
What’s in the Box ?
Never expose the camera to direct sunlight
Never touch the front glass of the product.
3