VIVOTEK
User's Manual - 17
Hardware Installation - FE9391-EV
Opening Dome Cover
Tamper-proof Screw
2. Use the supplied screwdriver to loosen the four screws and detach the dome cover from the
camera base. Then, follow the steps below to install the camera to either a ceiling or a wall.
Network Camera
Model No: XXXXXX
MAC: 0002D14BAD55
Pat. 6,930,709
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Made in Taiwan
1. Jot down the camera’s MAC address for later reference. This is especially important if you in-
stall many cameras in your surveillance deployment.
64
GB
10
I
1
3. If edge recording is preferred, install a microSD card to the camera.