background image

 

 

VIVOTEK

 

100 - User's Manual

Media > Audio

Audio Settings

Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note 

that if muted, no audio data will be transmitted even if audio transmission is enabled on the Client 

Settings page. In that case, the following message is displayed:

Internal microphone input: Select the gain of the external audio input according to ambient 

conditions. Adjust the gain from 0%  to 100%.

Audio type: Select audio codec and the sampling bit rate .

■ G.711 also provides good sound quality and requires about 64Kbps. Select pcmu (μ-Law) or 

pcma (A-Law) mode.

■ G.726 is a speech codec standard covering voice transmission at rates of 16, 24, 32, and 40kbit/

s. 

When completed with the settings on this page, click 

Save

 to enable the settings.

   

Содержание FD9187-HT-A


























































































































































































































































































































































































































































Отзывы: