Vivotek FD7141, Быстрое руководство по установке

Страница: 8 / 14

EN - 7
English
General Connection (without PoE)
N.C.
485B
485A
AC24V
AC24V
POWER COLLISION
LINK
RECEIVE
PARTITION 1 2 3
4 5
Network Deployment
4
1. If you have external devices such as sensors and alarms, make
connections from general I/O terminal block.
2. Use the supplied RJ45 female/female coupler
to connect the Network Camera to a switch.
Use Catagory 5 Cross Cable when Network
Camera is directly connected to PC.
3. Connect the power cable from the Network
Camera to a power outlet.
N.C.
N.C.
N.C.
AC24V
AC24V
N . C . : No Connector
N . C . : No Connector
N . C . : No Connector
AC24V: Power in AC 24V
AC24V: Power in AC 24V
G N D : Ground
D I : Digital Input
D O : Digital Output
+ 1 2 V : Power, 12V DC
GND
DI
DO
+12V
Ceiling mount without the bottom base (Embedded)
1. Attach the supplied Ceiling Hole Template Sticker to the wall.
2. Dig a hole along the inner circle of the sticker.
3. Through the 3 circles on the sticker, drill 3 pilot holes into the ceiling. Then hammer the supplied three
plastic anchors into the holes.
4. Mount the Netwrok Camera to the ceiling and feed the cables.
5. Through the three holes on the side of the camera base, insert the supplied three screws to corre-
sponding holes and secure them with a screwdriver.
1
5
2 3
4
Ceiling Hole Template Sticker
Drill hole