1. Use the included hex wrench to remove the socket head cap screws, and then open the front panel.
2. Use a Phillips screwdriver to loosen and remove the middle plate in the junction box.
Feed cables and install accessories, such as power adaptors and PoE injectors, through the box and the
waterproof connectors on the box.
3. Use the included hex head bolts to secure a gooseneck bracket to the junction box.
4. cables should have been connected and routed through the waterproof connectors. Cable conduits should
also be properly installed for waterproofness.
Please refer to the AM-518/51A Installation Guide for other options.
4. Use the included hex wrench to fasten the socket head screws for the front door.
5. Use the 4 mounting holes on the back of the junction box to attach to a pole mount or a corner mount bracket.
See previous discussions for details.
6. You can then attach the junction box, along with the camera, to a pole-mount or corner-mount position. A pole-
mount installation is shown below.
You may also mount the junction box directly to a wall. The mounting holes on the right hand side is accessible
when the front door is opened, and the anchors and screws are user-supplied. .
