9
English
Heater
Blower
IR angle selector
I/O terminal block
24V AC IN
12V DC OUT
24V AC OUT
Connectors to the front IR
Power LED
+ -
AE-510-I
Below is the pinouts for the DI/DO terminal block:
Facing the rear side of the housing, from left to right:
DO2
Connect to tank water pump.
DI2
Wiper control, connects to IP camera's DO for manually triggering washer.
RS485+
RS485+, RS485 can be used to control IR illuminator beam angles, etc.
RS485-
RS485-
DO+
+5V VCC
DI-
GND
DO1
IR LED status
DI1
IR control, synchronizes day/night mode switching for IP camera. It is related to IR
