VIVOTEK
User's Manual - 307
8.12 IP Filtering for ONVIF
Syntax:<product dependent>
http://<
servername
>/cgi-bin/admin/ipfilter.cgi?type[=<value>]
http://<
servername
>/cgi-bin/admin/ipfilter.cgi?method=add<v4/v6>&ip=
<ipaddress>
[&index=<value>][&ret
urn=<
return page
>]
http://<
servername
>/cgi-bin/admin/ipfilter.cgi?method=del<v4/v6>&index=<value>[&return=<
return page
>]
PARAMETER
VALUE
DESCRIPTION
type
NULL
Get IP filter type
allow, deny
Set IP filter type
method
addv4
Add IPv4 address into access list.
addv6
Add IPv6 address into access list.
delv4
Delete IPv4 address from access list.
delv6
Delete IPv6 address from access list.
ip
<IP address>
Single address: <IP address>
Network address: <IP address / network mask>
Range address:<start IP address - end IP address>
index
<value>
The start position to add or to delete.
return
<return page>
Redirect to the page <return page> after the parameter is assigned.
The <return page> should be the relative path according to the root
of camera. If you omit this parameter, it will redirect to an empty
page.
* If the <return page> is invalid path, it will ignore this parameter.
