ViVOpay Kiosk II User Guide
631-0071-01 ViVOtech
Proprietary
Page
18 of 23
2.7 Using the ViVOpay Kiosk II to Make a Purchase
2.7.1 Presenting Cards, Fobs, or NFC Phones
Your new ViVOpay Kiosk II allows for credit/debit card purchases using the new contactless
technology.
Present the card/fob/phone in close proximity to the front portion of the reader. Present the
card/fob/phone so that maximum surface area is parallel to the antenna as shown below. The
reader should beep and all four green LEDs should illuminate briefly to indicate a successful test.
This tests the reader's ability to read the RFID test card. If unsuccessful, there will be no reaction
from the reader. If you use a test card and the ViVOpay reader is attached to the ViVOpay Kiosk II
control unit, a dummy transaction can be tested. The transaction will not be authorized and will
come back with a response, but will at least test for end-to-end connectivity.
2.7.2 Making a Purchase
1. After the transaction has been entered on the ViVOpay Kiosk II control panel, the customer
should present their card/fob/phone in close proximity so that maximum surface area is
parallel to the antenna.
2. A single beep and all four LEDs briefly flashing indicates the card/fob/phone has been read
correctly.
