2
3
ASSEMBLY STEPS
STEP 1
Temperature at the front edge of mantle
should never exceed 110° F.
PACKAGE CONTENTS
TOOLS NEEDED
16 - 70.5lbs
(7.3 - 32kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A
(x1)
Magnetic Spirit Level
B1
(x4)
M4x12
B2
(x4)
M4x25
L
(x4)
M8x10
M1
(
x4)
M6 Lock Nut
O
(x4)
Plastic
Anchor
K
(x2)
M6x20
G
(x4)
M6 Washer
H
(x4)
14mm Spacer
I
(x4)
5mm Spacer
J
(x4)
M6x8
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE:
NOT ALL HARDWARE INCLUDED WILL BE USED
P2
(x1)
5mm Allen Wrench
P1
(x1)
10mm Wrench
Drill
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected], or call us at 1-800-371-5654.
C1
(x4)
M5x12
C2
(x4)
M5x25
D1
(x4)
M6x12
D2
(x1)
M6x25
E1
(x4)
M8x12
E2
(x4)
M8x25
F
(x4)
M8x50
N1
(x4)
M8 Washer
N2
(x4)
M8x63.5
Q1
(x1)
8mm Hex
Rod
Q2
(x4)
8mm Allen Wrench
BB
(x2)
VESA Bracket
AA
(x1)
Handle
CC
(x1)
Wall Board
DD
(x1)
Connecting
Rod
EE
(x1)
Front Panel
FF
(x1)
Arm
GG
(x2)
Wall Panel Cover
M2
(x4)
Plastic Washer
P3
(x2)
Cable Tie
STEP 2
If the main wall is wood frame, the spacing
between studs must be no more than 16” if
there is no center stud. The wall covering
(such as plaster or drywall) must be no more
than 5/8” thick, and the wall covering alone
must never be used to support the mount. All
mounting screws must be secured into a wood
stud for proper support.
NOTE:
“CL” = center
line
STEP 3
Mantle must not extend from mounting surface
more than 14 inches.
