Vivitek H9080FD Скачать руководство пользователя

Страница: 4 / 73

Copyright

This publication, including all photographs, illustrations and software, is protected under international copyright laws,

ten consent of the manufacturer.
The Vivitek logo is a trademark of “Vivitek Corporation.”
© Copyright 2009

Disclaimer

The information in this document is subject to change without notice. The manufacturer makes no representations or

warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or

fitness for any particular purpose. The manufacturer reserves the right to revise this publication and to make changes

from time to time in the content here without obligation of the manufacturer to notify any person of such revision or

changes.

About this manual

This manual is intended for end users and describes how to install and operate the DLP projector. Wherever possible,

relevant information such as an illustration and its description has been kept on one page. This printer-friendly format

is both for your convenience and to help save paper, thereby protecting the environment. It is suggested that you only

print sections that are relevant to your needs.

CopyrighT informaTion

Содержание H9080FD










































































Результаты поиска

Содержание H9080FD

Отзывы:

Похожие инструкции для H9080FD

Бренды по названию

Популярные бренды

Vivitek H9080FD, Руководство пользователя

Результаты поиска

Содержание H9080FD

Отзывы:

Похожие инструкции для H9080FD

Бренды по названию

Популярные бренды