Vivitek DU6675, Руководство пользователя

Страница: 43 / 54

DU6675/DW6655/DX6635 User Manual
42
OSD Operation - INSTALLATION
Projection Mode
Use the ◄► function to select a projection mode: Desktop Front, Desktop Rear, Ceiling Front and C Rear .
Standby Mode
Use the ◄► to select standby mode to Normal or Network Standby.
Network Standby: The projector maintains in the standby status at higher power (<6W) for network control. In
this mode, the projector can be turned on via network control system.
Normal: The projector maintains in the standby status at the lowest power (<0.5W), the projector can be turned
on using the remote control, RS-232 command.
High Altitude
Use this function to control the cooling fan of the projector, the default setting is OFF.
Normally, the projector can operate normally when this function is set to OFF. The projector detects ambient
temperature to regulate the cooling fan speed. However, the projector may turn off automatically if it is used in an
environment at excessively high temperature or in an area at a high altitude. In this case, please enable this function
by setting it to ON and have the cooling fan operate at a higher speed to control the internal temperature of the
projector.
Auto Power Off
This function is set to OFF by default. When it is set to ON and no input signal is received within 20 minutes, the
projector will turn off automatically.
Auto Power On
This function is set to OFF by default. When it is set to ON, the projector will turn on automatically when you connect
it to an AC power source next time. When you plug the power cable of the projector in an AC socket attached with a
switch, you can use this function and the power switch (instead of the remote control) to turn on the projector. Set
this function to OFF if you do not need to use it.