Vivitek DU6675, Руководство пользователя

Страница: 38 / 54

DU6675/DW6655/DX6635 User Manual
37
VGA
Select input source to VGA.
BNC
Select Input source from BNC, the input source can be RGBHV or Component signal from computer or component
video enabled device.
DVI-D
Select input source from DVI-D output of the computer or media device.
Video
Select input source from video output of the media device.
S-Video
Select input source from S-Video output of the media device.
HDMI
Select input source from HDIMI output of the computer or media device.
Component
Select input source from compoent output of the media device.
HDBaseT
HDBaseT input source from the HDBaseT transmitter.
Auto Search
Use the ◄► function to turn on/off Auto Search for the input source..
Auto Sync Adjust
You can use this function to set auto synchronization for the input signal.
Auto: The projector memorizes 10 sets of signal sources that you have used lately. When the Auto option is
selected, the projector will choose the signal that you use last
Always: The auto sync function is executed every time.
Color Space
This function allows you to change the corresponding color space for the input signal. In most cases, the correct
color space can be selected automatically by Auto mode. If the selection is not correct, you can use a specific color
space forcibly by selecting one of the following options:
Auto: The projector detects the input signal and switches to the corresponding color space automatically.
YCbCr: Set the color space to ITU-R BT.601.
YCbCr: Set the color space to ITU-R BT.709.
RGB-PC: Use the RGB color space and set the black to 0, 0, 0 RGB while set the white to 255, 255, 255 RGB (if a
8-bit image is used).
RGB Video: Use the RGB color space and set the black to 16, 16, and 16 RGB while set the white to 235, 235,
235 (if an 8-bit image is used) to correspond to the luminance value defined in the digital component standard.
VGA Setup
Set the H Total, H Start, H Phase and V Start for the VGA signal display.
Aspect Ratio
This function allows the user to adjust the aspect ratio of the image.
Overscan
Noise may appear on the edge of the projected image, use this function to select Crop to to hide the edge of the
image or Off to display the orginal image.
Background
Use this function to specify the image to be displayed on the screen when no signal is input. You can select the Logo,
Blue or Black.