11
Powering the Camera On/Off
Make sure the batteries have been inserted properly into your digital camera. If your camera
comes with a rechargeable lithium battery, make sure it is fully charged before the first use.
Make sure a Micro SD card has been inserted into your camera.
(Micro SD card up to 32GB - not included)
Please see
Initial
Camera
Setup
for more information.
Powering the camera ON
Press the
Power
button until the camera powers on.
After powering on, the camera the LED light turns on briefly and the back LCD screen turns on
with your camera in Photo Capture mode to start.
Powering the camera OFF
While the camera is on, you can press the
Power
button again at any point to turn your
camera OFF.
A “Goodbye” screen appears and then the camera will power off completely.
NOTE:
Your digital camera also has an Auto Power Off feature that will automatically turn off your
camera after a specific period of time that your camera is left idle. The Auto Power Off feature can
be set from the
‘Power Save’ camera’s general settings menu.
