Vivitar ViviCam 5019, Руководство пользователя

Страница: 6 / 32

5
When powering the camera ON for the first time the camera will take you through the INITIAL
CAMERA SETUP.
Powering the Camera ON
1) Batteries
Make sure the batteries, 3x AAA (1.5V) alkaline batteries, have been inserted properly into
your digital camera.
- Slide and open the battery compartment.
- Make sure the batteries are inserted with the correct polarity, as indicated on the inside of
the battery compartment door.
- Close the battery compartment door.
NOTE :
When the
“No Power” is displayed on the LCD, this indicates that your camera has
insufficient battery power and will automatically power off. If you have captured sample
images on the camera
‟s memory, you will need to download the sample photos and videos
to your PC. If there is no SD card inserted before it powers off, the photos and videos will not
be saved.

Remove the batteries from the camera when not in use for an extended period.

Do not mix alkaline and non-alkaline batteries.

Some features, such as Flash, will not work if the battery power level is low.

When the battery power is low the battery icon turns red and the camera will
automatically turn off a few seconds later.

Rechargeable batteries not recommended.

The energy status of the power is displayed on LCD as shown below:
Full battery power Medium battery power Low battery power