Vivitar Vivicam 3635, Руководство пользователя

Страница: 34 / 37

33
Setting the Self Timer
The self-timer interval can be changed from 10 seconds (default setting) to 3 seconds.
1. Enter the SET-UP menu mode and press the / button to select “Self Timer”.
“10 sec” is selected.
2. Press the button to select “3 sec” The setting will take effect at the time the menu
selection is made.
3. Move to the next menu or set the main switch to a mode other than
SET to exit the SET-
UP menu mode.
1 2
Setting the auto shut-off time
The auto shut-off time can be changed from 3 minutes (default setting) to 10 minutes, or the
function can be turned off.
1. Enter the SET-UP menu mode and press the / button to select “Auto Shut Off”.
“3min” is selected.
2. Press the button to select “10 min” or “Off”. The setting will take effect at the time the
menu selection is made.
3. Move to the next menu or set the main switch to a mode other than
SET to exit the SET-
UP menu mode.
Even if the selection is set to “Off”, the camera will automatically shut-off after several
hours.
1 2
Resetting the file number
The file number can be reset.
1. Enter the SET-UP menu mode and press the / button to select “Number Reset”.
2. Press the button to select “On”. The setting will take effect at the time the menu
selection is made.
3. Move to the next menu or set the main switch to a mode other than
SET to exit the SET-
UP menu mode.
If number reset is set to “On”, and there are no images within the card that were recorded
with this unit, images will be numbered from xxxxxx1.jpg. If there are images recorded
with this unit, the number following the last file no. will be used.