6
display. If you do not see the SD icon on the display, please check if the card was
inserted properly.
Make sure the SD card is not locked (check the lock switch on the side of the SD card). If
the SD card is locked this will prevent the camera from saving captured photos to the
SD card.
3. Power On
Flip open the LCD screen and press the
POWER
button
, located on the inside wall,
to turn on the digital video recorder.
Setting the Language
1. You will first be prompted to select a language for the camera.
The Language selection menu will appear. Use the Joystick to select the language of
your choice and then press the
OK
button to confirm the selection.
2. After selecting a language, you will be asked if you would like to continue with the initial
camera setup. A message will appear: “Continue with Camera Setup?” Select “Yes” to
continue or “No” to exit the setup.
Note:
If you select “No” and decide to leave the camera setup, the camera will be set
to its default settings. These settings can be adjusted at any time manually
using the menus in the camera.
