5
When powering the camera ON for the first time you may manually go through and setup some of
the features of your camera.
Powering the Camera ON
1) Battery
Make sure the battery installed properly and has been fully charged.
To charge your battery, follow one of the steps below:
First, open the battery compartment on the side of the camera.
Insert the battery in accordance with the polarity indicated.
Make sure to insert the lithium battery all the way into the battery compartment.
Then return and close the battery compartment cover.
A. Charge the battery using the USB connection cable (included).
- Connect one end of the USB connection cable into the USB port on your camera.
- Connect the other end of the USB cable to the USB port on your computer.
- The charge light will turn off when the battery is fully charged.
