Vivitar DVR 410V2, Руководство пользователя

Страница: 20 / 36

19
This setting should be adjusted when the environment is lighter or darker than normal.
When the environment has more light than is needed, reduce the exposure setting (by using the
negative - count) to reduce the amount of light allowed into the lens by your camera.
If the environment has less light (darker) than is needed, increase the exposure setting (by using
the po count) to increase the amount of light allowed into the lens by your camera.
1) Press the Up or Down direction buttons to select the Exposure option in the Setup menu.
2) Press the OK / Shutter button.
3) Press the Up or Down direction buttons to select an Exposure value (from 3 brightest to -3
darkest)
4) Press the OK / Shutter button to confirm, save and exit to the Photo Capture mode.
5) An icon reflecting your selection will display on the LCD screen.
6) Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
ISO
The ISO menu allows you to set the level of sensitivity that your camera has to light in the
surrounding environment.
When the ISO level is increased, the image sensor in your camera will be more sensitive to light
and allow you to capture images in lower-light situations. The higher sensitivity to light however,
may reduce the quality of the images that are taken.
When the ISO is reduced, the image sensor in your camera will be less sensitive to light and will
optimize the image quality in environments with bright lighting.
1) Press the Up or Down direction buttons to select the ISO option in the Setup menu.
2) Press the OK / Shutter button.
3) Press the Up or Down direction buttons to select an ISO value from the menu that appears:
Auto, 100, 200 and 400
4) Press the OK / Shutter button to confirm, save and exit to the Photo Capture mode.
5) An icon reflecting your selection will display on the LCD screen.
6) Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.