Vivid Veloblade Volta, Руководство пользователя

Страница: 18 / 25

17
6.Software Modes
•
Board CCD – Printed material with registration marks
•
Roll CCD – Printed rolls of material with registration marks
•
Direct Cut – Material without registration marks.
Board CCD: Switch the Window to CCD Window and select Board CDD from the
drop down mode. Select how many sheets you require cutting and press apply
[Figure 6.1].
Switch the window into Debug view and press feed [Figure 6.2]
Import the artwork for cutting.
Ensure the artwork is matches the direction on the screen [Figure 6.2] .Rotate
the artwork if needed [Figure 6.3].
Select Mode
How much material
needs cutting
Apply
Start
Figure 6.1
This is the front of the
feeder closest to the belt
and is the direction it feeds.
Figure 6.2