2
Wireless Range
Range between the zone thermostat and the Z955W master
thermostat is approximately 100 feet with no obstructions
and approximately 50 feet in standard residential metal,
brick, and concrete construction.
Run Key
RUN
only shows if the
zone thermostat setpoint
has been changed.
Pressing
RUN
returns the
zone to running set schedule.
Note:
THE
SHOW SET
must
be set to
YES
in
TECH SETUP
MENU
before the
RUN
key
will be shown in the display.
Wireless Icon
Remote Label
Each indoor remote
sensor can be labeled.
The label options can be
found during tech setup.
Getting to know your
Zone Thermostat
LCD
1
2
3
Remote Name
Operation Keys
4
5
Temperature
Setpoint Keys
Temperature
Indicates the current
ambient temperature.
Glow in the Dark
Light Button
5
1
4
2
3
Low Battery Indicator
Replace batteries when
this indicator is shown.
Clean Key
Pressing the
CLEAN
key
will allow 30 seconds to
clean the display. The keys
will be inoperable during
this time. NOTE:
THE SHOW
SET
MODE
must be set to
YES
in
TECH SETUP MENU
before the
CLEAN
key will
be displayed.
NOTE ABOUT THE LIGHT BUTTON:
This button is used to light up the
display. DO NOT hold the light button
down for longer than 3 seconds or you
will enter the technician setup screens.
If you inadvertently enter the tech
setup press and release the light button
a second time to exit the tech screens.
NOTE ABOUT SETPOINT & OPERATION
KEYS:
These keys will only be shown
if they have been turned on in
Technician Setup menu.
Setpoint Temperature
Displays the user selectable
setpoint temperature.
Mercury Notice:
All of our products are mercury free.
However, if the product you are replacing
contains mercury, dispose of it properly.
Your local waste management authority
can give you instructions on recycling
and proper disposal.
The Setpoint Adjustment and
Operational Keys
will only
appear if enabled at the 'Show
Set' step in Tech Setup.
QUICK REFERENCE
HOLD Key
Hold only shows if the zone
thermostat setpoint has been
changed. Pressing
HOLD
will
set a permanent setpoint hold.
NOTE:
THE SHOW SET
must
be set to
YES
in
TECH SETUP
MENU
before the
HOLD
key
will be displayed.
