Vivax CM-800D, Руководство пользователя

Страница: 30 / 48

2.CLOCK SETUP
Press SET button, LCD display “set clock”
A: Hour setup, after press SET button one time, LCD display ”CLOCK”, it means that clock is
in setup state. Press “Hr” button one time, LCD display”13:00”. LCD will display increase 1
hour after press every time. If you remain pressing “Hr” button above 2 seconds, then the
time will increase about 4-5 hours quickly per seconds.
B: Minute setup, at this time, press “Min” button one time, LCD display “12:01”, then LCD
will increase 1 minute after pressing “Min” button per time, if you remain pressing “Min”
button above 2 seconds, then the time will increase quickly about 4-5 minutes per seconds.
3. TIME SETUP
Switch on the unit, LCD always display”12:00” at initial, if you want change to your current
time, you could setup as below:
Keep pressing “Set” for 3 seconds long, LCD display “CLOCK”, repeat above procedure A-B,
setup HOUR and Minute to want you desired. After your setup finished, pressing “Set” 3
seconds long, LCD display “Set CLOCK”, that means your setting is successes.
4. When reach to the set time, “AUTO” lamp turn off and “ON” lamp turn on, the heating
element works and begin to brewing. If you didn’t turn off the unit by manual, after
40 minutes
the unit will stop heating whatever if it is in manual or automatic state. The unit has no
remember function.
CLEANING INSTRUCTIONS
1. Be sure the unit is unplugged and cooled.
2. Grasp the small handle on the brew basket and swing basket completely open.
3. Remove the brew basket by lifting the basket straight up and off of pivot hinge.
4. Discard the paper filter with the grounds.
5. Clean parts as follows:
• Brew basket, carafe and lid are all top rack dishwasher safe; or they may be hand washed in
warm, sudsy water.
• Wipe the exterior and the “Keep Hot” plate with a soft damp cloth. Do not use abrasive
cleansers or scouring pads. Never immerse the coffeemaker in water.
6. Insert brew basket onto pivot hinge and swing closed
PART LIST
Please check the construction
drawing as above:
1. Water tank cover
2. Funnel cover
3. Water tank
4. Funnel
5. Base
6. Cup cover
7. Carafe
8. Handle
9. Control panel
10. Warming plate
11 Bottom cover