Vivax CM-800D, Руководство пользователя

Страница: 29 / 48

SHORT CORD INSTRUCTIONS
A short power-supply cord is provided to reduce the risk of becoming entangled in or tripping
over a long cord.
Longer detachable power-supply cords or extension cords are available and may be used if
care is exercised in their use.
If a longer detachable power-supply cord or extension cord is used, (1) the marked electrical
rating of the extension cord should be at least as great as the electrical rating of the appliance,
and (2) the longer cord should be arranged so that it will not drape over the counter top or
table top where it can be pulled on by children or tripped over unintentionally.
GETTING STARTED
1. Remove all stickers, packing material, and literature.
2. Wash the carafe, carafe lid and brew basket in warm sudsy water—rinse thoroughly.
These parts are also top rack, dishwasher safe.
CLEANING BEFORE FIRST USE
Cycle the unit once with water to help remove any sediment.
1. Open lid and pour cold water into water reservoir up to the 12-cup level mark on the water
window. Do not overfill.
2. Close the reservoir lid.
3. Insert brew basket pivoting hinge into brew basket holder.
4. Place a standard paper filter into the brew basket (do not add coffee grounds).
5. Grasp brew basket by small handle and use it to swing the brew basket closed.
6. Plug in the coffee maker.
7. Place the carafe with carafe lid into coffee maker and push the “ON” switch/ button.
8. When cycle is finished, turn the coffee maker off and discard used filter and the water from
the carafe.
BREWING COFFEE
1. Open water reservoir lid.
2. Use the carafe to fill the water reservoir with cold water. Watch water window for the
desired level. Close the reservoir lid.
3. Grasp brew basket by small handle and swing open. Insert the permanent filter included
into the brew basket, add ground coffee into filter (we recommend one heaping tablespoon
for every two cups).
4. Grasp small handle and swing the brew basket closed.
5. Place the carafe into the coffeemaker.
6. Plug in the coffeemaker.
7. Switch on the coffee maker according to control panel cooperation guiding.
8. Replace the carafe on the “Keep Hot” plate when not serving to keep coffee hot.
Important: Do not swing open brew basket while brewing.
9. Switch off the coffee maker when finished brewing .
CONTROL PANEL OPERATION:
1.Plug in the coffee maker, LCD display ”12:00”, press the button ”Prg” one time, “Auto” lamp
comes on, “ON” no indicator, the unit at the auto state. Press the button ”Prg” two times.
“ON” lamp comes on, “Auto” no indicator, the unit start brewing