Vivax CF-278 S, Руководство пользователя

Страница: 46 / 64

ENG
VIVAX
.
21
Tips for Energy savings
Try not to open the door too often, especially when the weather is wet and hot.
Once you open the door, close it as soon as possible.
Every now and then check if the appliance is sufficiently ventilated (adequate air
circulation behind the appliance).
In normal temperature conditions, please arrange the thermostat at the middle
setting.
Before loading the appliance with packages of fresh food, make sure they are
cooled to ambient temperature.
Ice and frost layer increase energy consumption, so clean the appliance as soon
as the layer is 3-5 mm thick.
If it is the outer condenser, the rear wall should be always clean free of dust or
any impurities.
◆
The appliance should be located in the coolest area of the room, away from
heat producing appliances or heating ducts, and out of the direct sunlight.
◆
Let hot foods cool to room temperature before placing in the appliance.
◆
Overloading the appliance forces the compressor to run longer.
◆
Foods that freeze too slowly may lose quality, or spoil.
◆
Be sure to wrap foods properly, and wipe containers dry before placing them
in the appliance. This cuts down on frost build-up inside the appliance.
◆
Appliance storage bin should not be lined with aluminum foil, wax paper, or
paper toweling. Liners interfere with cold air circulation, making the appliance
less efficient.
◆
Organize and label food to reduce door openings and extended searches.
◆
Remove as many items as needed at one time, and close the door as soon as
possible
Disposal, EU Declaration of Conformity
DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT
To protect our environment and to recycle the raw materials used as
completely as possible, the consumer is asked to return
unserviceable equipment to the public collection system for electrical
and electronic.
The symbol of the crossed indicates that this product must be
returned to the collection point for electronic waste to feed it by recycling the best
possible raw material recycling.
By ensuring this product you will prevent possible negative effects on the