Vivax CF-278 S, Руководство пользователя

Страница: 41 / 64

VIVAX
ENG
.
16
◆
Use a damp cloth to clean the exterior, and then wipe with a standard
furniture polish. Make sure that the door is closed to avoid the polish
getting on the magnetic door seal or inside the unit.
◆
The grille of the condenser at the back of the unit and the adjacent
components can be vacuumed using a soft brush attachment.
◆
If you remove frozen foods during the cleaning, it is recommended that
such foods consumed in the shortest possible time.
Cleaning Tips
Condensation may appear on the outside of the unit. This may be due to a
change in room temperature. Wipe of any moisture residue. If the problem
continues, please contact a qualified technician for assistance.
Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as
toothpastes, organic solvents (such as alcohol, acetone, banana oil, etc.), boiling
water, acid or alkaline items clean refrigerator considering that this may damage
the fridge surface and interior.
Do not rinse with water so as not to affect the electrical insulation properties.
Please use a dry cloth when cleaning lighting lamps, temperature control knob
and electrical components.
Do not use metal utensils or electric heater for cleaning, drying or
defrosting, so as not to damage the appliance.
Please remove the food and put in a cool place before removing
drawers and other accessories and cleaning
.
Defrost
Your unit have Auto defrost function in refrigerator compartment. This means that
it is not necessary to defrost the refrigerator compartment. The refrigerator itself
cyclically carried out de-icing the rear wall. The melting water flows into the
shallow plate above the compressor and evaporates due to the heat of the
compressor work.
Unit provides Auto defrost refrigerator compartment automatically.
It is necessary to clean the refrigerator. If an occasional happen any accumulation
of ice or frost, during the regular cleaning, while the refrigerator is disconnected
from the power supply, there will be a melting frost or ice. Make sure the inside of
the refrigerator completely dry before you reconnect to the power supply.
Defrost Freezer Compartment
Defrost the freezing compartment whenever the layer of frost on the surface of the
evaporator reaches 3 or 4 mm.
1. Set the thermostat at “ MIN ” position or below this position and disconnect
the refrigerator from main supply.