Vivax ACP-24COFM70GEI, Руководство по обслуживанию

Страница: 26 / 37

Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
Replace the blocked sub-assy
Adjust the installation position
Reincharge the refrigerant
Check the motor wiring is correct
or not or replace the motor
Replace the blocked sub-assy
Clean and wash
Clean and wash
Adjust the installation position
Replace the high pressure switch
Check the motor wiring is correct
or not or replace the motor
System high pressure protection
Air exhaust protection
Examine the abnormity of
motors of indoor and outdoor
units.
Examine whether the refrigerant system leaked or not,
whether the system voltage is lower or not.
Examine whether the condenser or indoor unit
filter is dirty or blocked.
Examine whether the refrigerant system is blocked or not,
especially the capillary, electric expansion valve etc. such
these kinds of components.
Examine whether the outdoor unit is improper
installed, if there is any thing blocked, bad
ventilation.
Compressor air exhaust protection E4 or running indicator extinguish 3s blinks 4 times
Examine whether the refrigerant system is blocked or not,
especially the capillary, electric expansion valve etc. such
these kinds of components.
Examine the abnormity of
motors of indoor and outdoor
units.
Examine whether the condenser or indoor unit
filter is dirty or blocked.
Examine whether the outdoor unit is improper
installed, if there is any thing blocked, bad
ventilation.
Examine whether the pressure switch is damaged or not,
after unit stopped, (pressure 3.6Mpa), if put through
is normal.
System high pressure protection E1 or running indicator extinguish 3s and blinks one time