Vivax ACP-09CH25GEI, Руководство по обслуживанию

Страница: 39 / 70

Operating Procedures / Photos
Disassemble Capillary
Unsolder the soldering points of the capillary
subass embl y and remove the capillary. Make
sure that do not let any welding dregs to block
Capillary subassembly
the capillary.
(refer to Figure 7 - 34 )
(refer to Figure 7 - 35 )
compressor
Figure 7 - 34
Figure 7 - 35
Figure 7 - 36
Small Valves
Unscrew the two screws fixing the big valve,
unsolder the soldering point between the big
valve and the return-air duct and remove the big
valve.
(Note: when unsoldering the soldering point, use
wet cloth to completely wrap the big valve to
prevent valve body from being harmed by high
temperature . )
Unscrew the two screws fixing the
small valve,
unsolder the soldering point connecting the small
valve and the fork type pipe, and remove the small
valve.
bolts
Big Valves
Disassemble Valves
Disassemble Compressor
Unscrew the three nuts at the foot of the compressor.
Unsolder the soldering points at the suction and the
discharge pipes of the compressor,carefully remove
the pipes and take out the compressor.
(refer to Figure 7 - 36 )
foot nut