Vivax ACP-09CH25GEI, Руководство по обслуживанию

Страница: 29 / 70

Operating Procedures / Photos
Disassemble Electric Box
Remove the breakwater film.
Remove the grounding wire on the evaporator.
Take out the tube sensor.
Pull out the plugging connector of the indoor motor
(refer to Fig . 7-7 )
Tube sensor
and unscrew the fixing screw on electric box to
remove it.
grounding wire Room sensor
breakwater film.
Fig. 7-7
screw
plugging connector
screw
rear pipe clamp
Disassemble Evaporator
Evaporator
Unscrew the screw fixing the rear pipe clamp to
remove it.
(refer to Figure 7-8 )
Unscrew the screws fixing the evaporator, two on the
left and two on the right (note: one of the screws is
under the sponge,you should rive off the sponge first.)
Manually lift the evaporator, and release the side
clasp of the evaporator from the groove.
Carefully take out the evaporator and pay attention
to protect the connecting pipe.
(refer to Fig . 7-9, 7-10 )
Fig . 7-8
Fig . 7-9
Screw