Vivax ACP-09CH25AEFI, Руководство пользователя, Страница: 174 / 220

NAMES OF PARTS OPERATING INSTRUCTIONS
8
Air inlet(side) Air inlet(rear)
9
Air outlet
10
Indication lamp
NOTE:
The display panel of indoor
unit may look like one of the following:
fresh defrost run timer
Names of parts
Indoor unit
1. Front panel
2. Air inlet
3. Air filter
4. Air outlet
5. Horizontal air flow grille
6. Vertical air flow louver(inside)
7. Display panel
Outdoor unit
8. Connecting pipe
9. Connecting cable
10. Stop valve
NOTE:
All the pictures in this manual are for explanation
purposes only. The actual shape of the indoor
unit you purchased may be slight different on
front panel and display window.The actual shape
shall prevail.
Indication lamp
FRESH indication lamp(optional)
Lights up when Clean Air feature is
activated.
DEFROST i
ndication lamp
Special functions
Refrigerant Leakage Detectio
With this new technology, the display area will appear EC or the indication lamps will continue
flashing when the outdoor unit detects refrigerant leakage.
Louver Angle Memory Function(optional):
Within the scope of safety angle, it will memorize the open angle of horizontal louver.
If it exceeds, it will memorize the boundry of safety angle. In the following circumstances, it will
return to standard angle: 1) pressing the manual switch, 2)unplug and then plug
in the machine.
So we strongly suggest that the open angle of the horizontal louver should not be
set too small, in case the condensed water forms and drops from the horizontal louver.
SELF CLEAN function(Optional)

Function used after the Shut Down of cooling operation to clean the Evaporator and
keep it as fresh for the next operation.

The unit will operate as following sequence : FAN ONLY mode at Low fan speed--Heating
operation with LOW fan speed(applicable to cooling & heating modles only) ---FAN ONLY
operation--Stop Operation---Turn off.
Note:

This function is only available under COOL(AUTO COOL, FORCED COOL) and DRY mode.
Before select the function, it is recommended to run the air conditioner under Cooling operation
for about half an hour. Once the Self Clean function is activated, all TIMER setting will be
cancelled.

During Self Clean operation, when press the SELF CLEAN button on the remote
controller again will stop the operation and turn off the unit automatically.
（
A
）
fresh defrost run timer
（ B ）
(Enabled on cooling & heating models only):
Lights up when the air conditioner starts
defrosting automatically or when the warm
air control feature is activated in heating
operation.
TEMPERATURE
indication lamp
Displays the temperature settings when
the air conditioner is operational.
Displays the malfunction code when
fault occurs .
RUN indication lamp
This lamp illuminates when the air
conditioner is in operation.
TIMER indication lamp
Lights up during Timer operation.
CLEAN AIR function(on some models)
Improving the quality of indoor air is one of the purposes of an air conditioner. This air
conditioner is equipped with ionizer or Plasma Dust Collector(Depending on specific
configuration of the model). With the anions generated by Ionizer, the air circulation
of the air conditioner fills the room with refreshing, natural and healthy air. The Plasma
Dust Collector generates a high voltage ionization zone, through which the air is converted
to plasma. Inside the air most of the dust, smoke, and pollen particles are captured by the
electrostatic filter.
Anti-mildew function(Optional)

When turns off the unit on COOL, DRY, AUTO (Cool) mode, the air conditioner will continue
operating for about 7-10 minutes (depending on models) at LOW fan speed. If turns off on HEAT
mode, the unit will continue operating for about 30 seconds at LOW fan speed. This will help to
dry up the condensed water inside the evaporator, and prevent the breeding of mildew.

Under Anti-mildew operation, do not restart the air conditioner until the unit is completely off.
5
6