Vivato VA2200, Руководство пользователя

Страница: 75 / 78

Copyright © 2004, Vivato, Inc. Vivato Wi-Fi AP/Bridge User Guide 75
Security Settings
Security Configuration Web Pages
Configuring WEP in Your Client
See "Security>WEP" on page 71 for a description of WEP.
With the client enabled and close enough to the Wi-Fi AP/Bridge to receive its wireless signal,
use the following steps to configure WEP after accessing the Wireless Network Connection
Properties (described in the previous section).
If the AP/Bridge is not close enough to the client
to receive its signals, or the AP/Bridge is turned off, you can manually enter its ESSID in the
“Network name (SSID):” field.
Step 1. Click on the Wireless Networks tab in the Wireless Network Connection window and
select the Vivato entry (see Figure 15— Configuring WEP in Your Client on page
75 ). If the ESSID for the Wi-Fi AP/Bridge’s wireless interfaces has been changed, use
that entry instead.
If you are not receiving the Wi-Fi AP/Bridge’s signal (no ESSID is shown), verify that
a wireless interface has been enabled on the Wi-Fi AP/Bridge. See
"Network>Wireless
Interfaces" on page 66.
Step 2. Click Configure to display the WEP settings.
Step 3. Check the box next to “Data encryption (WEP enabled)”.
Step 4. Un-check the box for automatic WEP key assignment and enter the WEP key(s). WEP
keys are automatically assigned only when using 802.1x security.
Figure 15— Configuring WEP in Your Client
2
1
3
4
3
Vivato
Un-check this box...
and enter your WEP key information
in these fields.