Vivato VA2200, Руководство пользователя

Страница: 57 / 78

Copyright © 2004, Vivato, Inc. Vivato Wi-Fi AP/Bridge User Guide 57
Network Settings
Network Configuration Web Pages
Network>General
The General Network Settings are used to specify other devices in your network that the Wi-Fi
AP/Bridge must communicate and the routes used to get there.
Create a New Route
Routes tell the Wi-Fi AP/Bridge where to send packets destined for specified IP addresses.
•
Name/Destination
: Enter the host name or IP address prefix of the destination to which
you are trying to connect. For example, if a host called “bonanza” is at IP address
192.163.20.17, you could either enter “bonanza” or “192.163.20.0”. When entering a
host name, the host name and its IP address must first be entered into the host table using
the
Create a New Host
function.
•
Gateway
: Enter the IP address of the gateway used to access addresses on the destination
subnet.
• Netmask : Enter the subnet mask that defines the range of IP addresses for this route.
Current Routing Information
The Current Routing Information table indicates how packets within specified IP address ranges
are directed (routed). In the example below, all packets addressed to the 192.165.0.0 base IP
address that are within the Netmask of 255.255.255.0 are routed through the default bridge - br0.